AZFP CONFIG APP
GPIO OFF, 2 sec.!
DEVICE ID: IMB076 
A,B: 1200, 10
GO....
GPIO ON, wait for 5 sec.!
fd: 3
command1: sssssssssssssssssssssssssssssssssssssssssssssssssssssssss

, len: 59
write ssss: 59
....................................................................................................................write ssss: 59
...write ssss: 59
...cmd to exec: #P1F1RA 19
^P1 freq 1 RangeAvgSamples  19         @

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     
cmd to exec: #P1F2RA 27
^P1 freq 2 RangeAvgSamples  27         

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     
cmd to exec: #P1F3RA 27
^P1 Warning 'Some range parameters modified'

^P1 freq 3 RangeSamples     11070      

^P1 freq 3 LockOutIndex     0          

^P1 freq 3 RangeAvgSamples  27         

^P1 freq 3 RangeAvgSamples  27         

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     
cmd to exec: #P1F4RA 27
^P1 Warning 'Some range parameters modified'

^P1 freq 4 RangeSamples     10935      

^P1 freq 4 LockOutIndex     0          

^P1 freq 4 RangeAvgSamples  27         

^P1 freq 4 RangeAvgSamples  27         

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     

^P1 StorageFormat    linear     
cmd to exec: #P1U ASL
^P1 VEEPROMSAVE SUCCESSFULL
cmd to exec: ?
------------------------------------------------------------------------

Commands are composed of one or more characters followed by one or more 

parameters on one line. Commands and parameters are separated by blanks.

Command or parameter letters enclosed with braces {} are optional.

Parameters enclosed with square braces [] are mandatory.

All addresses and values are expressed in base 16, Counts are in base 10.

 

COMMAND  PARAMETER(S)        DESCRIPTION

&G                           Deploy unit. then send ACK

&F                           Full duplex

&H                           Half duplex

&Pico                        Jump to PICO DOS

&Reset                       BIOS Reset

&V                           Show firmware version

&Wreset                      Reset using watchdog

dn                           Dump system variables and parameters

ds                           Dump system variables only

dp                           Dump parameters only

di                           Display directory on FLASH

dc                           Display condense parameters

ee       [parameter]         Erase VEE parameter from VEEPROM memory         (CAUTION !!!)

es                           Show all VEE parameters                                     )

er                           Read system parameters from VEEPROM and show                )

ed       [ERASE]             Erase all parameters in the VEEPROM except SYS. (CAUTION !!!)

ea       [NOAUTO, AUTO]      Enable or disable no auto deploy

eb       [ON, OFF]           Enable or disable backscatter pings

eo       [ERASE]             Erase old configuration data

ex       [ERASE]             List and ask to erase entries (CAUTION !!!!)

ec                           Clean up and compact VEEPROM

en       [SERIAL  serial]    View or set serial number of the instrument

ev       [BV version]        View or set board version of the instrument

#P1                          Show phase 1

#P1C  [y m d hr min sec]     Set the real time clock date and time

#P1Dy                        Set phase 1 digrate all channels where y=0,1,2 0=64000 1=40000 2=20000

#P1Ky                        Set phase 1 average pings in the burst y=1=true y=0=false 

#P1FxEy                      Set phase 1 Acquire frequency x=freq(1,2,3,or 4) y=1=true y=0=false 

#P1FxDy                      Set phase 1 digrate where x=freq(1,2,3,or 4) y=0,1,2 0=64000 1=40000 2=20000

#P1FxP  {pulse_len}          Set phase 1 pulse length, x=freq(1,2,3,or 4)

#P1FxRA {range_averaging}    Set phase 1 range averaging x=freq(1,2,3,or 4)

#P1FxRL {range_lockout}      Set phase 1 range lockout   x=freq(1,2,3,or 4)

#P1FxRS {range_samples}      Set phase 1 range samples   x=freq(1,2,3,or 4)

#P1RA   {range_averaging}    Set phase 1 range averaging all channels

#P1RL   {range_lockout}      Set phase 1 range lockout all channels

#P1RS   {range_samples}      Set phase 1 range samples all channels

#P1Ox                        Set phase 1 x=R (RS232 only) x=F (FLASH & RS232) x=O (FLASH only)

#P1PP   {ping_period}        Set phase 1 ping period

#P1PI   {profile_interval}   Set phase 1 profile interval

#P1PN   {ping_per_profile}   Set phase 1 pings per profile

#P1S                         Set the AZFP to one phase, start date now, RS232 output, long duration

#P1TT   [minutes]            Set the start date to the top of the next hour + optional minutes 

#P1TD   [y m d hr min sec]   Set the start date to optional date entered, set to now if no date is entered

#P1U    [ASL]                Save phase parameters to VEEPROM 'ASL' command line parameter required

#PI                          Initialize phase parameters (resets clock 1 second timer)

#PG                          Acquire one or more and transmit one profile

#PS                          Set the sound speed

#CE                          Condense Pings Enable

#CD                          Condense Pings Disable

#COB                         RS232 output format BINARY - standard binary packet format

#COA                         RS232 output format ASCII  - ASCII output

#COS                         RS232 output format BINARY SHORT - short binary format

#CSR                         Storage to RS232

#CSF                         Storage to FLASH

#CSB                         Storage to FLASH & RS232

#CMA                         Condense all profiles

#CMO [N]                     Enable modulus mode and condense every N profile

#CB  [C1] [C2] [C3] [C4]     Set bin averaging for each channel, min 1 max 1000

#CW                          Write condense parameters to  VEEPROM

#CR                          Load condense parameters from VEEPROM and display them

#CZD                         Disable Sea-Bird modem operation

#CZE                         Enable  Sea-Bird modem operation (condensed data output only)

#DIx                         Digital IO Mode x=1 ON, x=0 OFF, x=? report

#STx                         Enable/Disable first 24 status information x=1 ON, x=0 OFF, x=? report
cmd to exec: #P1
^P1 ------------------------

^P1 startdate 2019  4  4 13  2 40

^P1 NumPhases 1          

^P1 NumFrequencies   4          

^P1 Phase Type       normal phase

^P1 Output    RS232 only 

^P1 Duration               1800       

^P1 PingPeriod             2          
We have PingPeriod: 2

^P1 BurstInterval          120        
We have BurstInterval: 120

^P1 PingsPerBurst          50         
We have PingsPerBurst: 50

^P1 AverageBurstPings      1          
We have AverageBurstPings: 1

^P1 freq 1 frequency        67         

^P1 freq 1 acquire          1          

^P1 freq 1 pulselen         500        

^P1 freq 1 DigRate          20000      

^P1 freq 1 RangeSamples     13851      

^P1 freq 1 LockOutIndex     0          

^P1 freq 1 RangeAvgSamples  19         

^P1 freq 1 StorageFormat    linear     

^P1 freq 2 frequency        125        

^P1 freq 2 acquire          1          

^P1 freq 2 pulselen         500        

^P1 freq 2 DigRate          40000      

^P1 freq 2 RangeSamples     11124      

^P1 freq 2 LockOutIndex     0          

^P1 freq 2 RangeAvgSamples  27         

^P1 freq 2 StorageFormat    linear     

^P1 freq 3 frequency        200        

^P1 freq 3 acquire          1          

^P1 freq 3 pulselen         500        

^P1 freq 3 DigRate          40000      

^P1 freq 3 RangeSamples     11070      

^P1 freq 3 LockOutIndex     0          

^P1 freq 3 RangeAvgSamples  27         

^P1 freq 3 StorageFormat    linear     

^P1 freq 4 frequency        455        

^P1 freq 4 acquire          1          

^P1 freq 4 pulselen         500        

^P1 freq 4 DigRate          40000      

^P1 freq 4 RangeSamples     10935      

^P1 freq 4 LockOutIndex     0          

^P1 freq 4 RangeAvgSamples  27         

^P1 freq 4 StorageFormat    linear     
our values: 1200, 10

=== END =============================
GPIO OFF, 2 sec.!